Trapezoidal steel sheet
The trapezoidal steel sheet is a space-enclosing, static finished component for industrial and storage halls. It is used for covering halls in the gable and side area. The trapezoidal steel sheet profile is strip-galvanised and has a thickness of 0.63 mm. It is provided with a plastic coating at the outside (25my) and a protective lacquer on the inside. It is installed as horizontal cladding. As standard, our trapezoidal steel sheet is supplied in the colour white aluminium. However, we offer a selection of many standard colours for the panels. If an element gets damaged over time, no large-scale replacement is necessary since each individual trapezoidal steel sheet can be replaced separately.
Trapezoidal steel sheet with protection against condensation water
The trapezoidal steel sheet is a space-enclosing, static finished component for industrial and storage halls. It is used for covering halls in the gable and side area which pay attention to the moisture sensitivity of the materials. A fleece coating on the inside of the profiled steel sheets absorbs condensation water (sponge effect) and prevents dripping or running down. The fleece is able to absorb approx. 300g/m² water. This amount of water can be absorbed very quickly and also be released very quickly in case of a small temperature increase and optimum ventilation, so that an absorbent surface is always available. The trapezoidal steel sheet is installed as horizontal cladding.